This makes for overload and ground loop problems. The EQ and COMPRESSOR are in line, and the Very important: Do NOT use the mike input. TIGERTRONICS BOX, WITH SPECIAL CABLE FOR RTTY/PKT CONNECTOR ON FT-950, AND MATCHING JUMPER HEADER.ACER COMPUTER RUNNING WINDOWS 7 FULLY PATCHED.You may have to manually set this from time to time, once a month is not often enough.
Line in the "DT" column as very close to 0.0 if it is accurate. If your computer clock is correct, it will show up on most of the received station's If you need more power, use an amplifier, but this is discouraged by FT8 users.ĪLSO, YOU WILL NEED TO SET YOUR COMPUTER'S CLOCK TO SYNC WITH WWV OR "".įT8 depends heavily on timed transmissions. Use the internal tuner or an external transmatch to get it 1.1:1, to avoid heating. IMPORTANT NOTICE: DO NOT EXCEED 20 WATTS IN FT8 MODE, DUE TO DUTY CYCLE LIMITS ON TRANSMIT.īE SURE SWR IS LOW.
This is meant to help people get on the air.
#N1MM LOGGER PLUS 7610 SETUP GUIDE MANUALS#
This page is just the basics, meant to set the controls for "level flight".Īny fancy stuff you want to get into, read the manuals and try it out. HOW THESE SETTINGS WORK ON FTDX1200 IS UNKNOWN. HERE IS WHAT YOU NEED TO GET YOUR FT-950 ON FT8 MODE. USING THE YAESU FT-950 ON FT8 DIGITAL MODE, MY SETUP PROCEDUREįT8 is a very sophisticated program, and it took me parts of two days to actually make a contact.
0 kommentar(er)
